Quick answer
Release the small rays around the top and sides of the diamond frame. Work through the angled upper bars before reducing the converging lower triangle.
- Level
- Level 30
- Difficulty
- Normal
- Objective
- Separate all linked pieces in this layout: Diamond-shaped frame made from angled bars. Align each opening with its connection, then clear the remaining branches.
Video walkthrough
Video by Rock Gaming Channel on YouTubeWatch on YouTube
YouTube loads only when you press play. You can also open the video on YouTube.
Step-by-step
Release the small rays around the top and sides of the diamond frame. Find the actual gap on this piece before turning it. Follow its contact with the neighboring link, rather than assuming the colored outlines form one object. Make a small controlled rotation and check whether the connection has released before selecting another part.
Work through the angled upper bars before reducing the converging lower triangle. Reassess the structure after each release: a piece that looked trapped at the start may now have only one neighbor. Use the empty area to see the next contact clearly. Follow the branch described here instead of jumping to a similar color elsewhere.
Separate the last short center bars to clear the board. Watch the final connection as well as the open ends. A nearly empty board can still contain a linked pair, so keep aligning the gap with the remaining contact. Stop repeating a turn that changes nothing and inspect which neighboring piece still holds the chain.
Tips
- Release the small rays around the top and sides of the diamond frame.
- Work through the angled upper bars before reducing the converging lower triangle.
- Separate the last short center bars to clear the board.
- After every release, check which pieces are still connected; color alone does not determine the move order.
Common mistakes
- A slanted bar is not an open circle; copy the matching joint movement rather than spinning around an imagined center.
- Repeating the same rotation without checking the opening and the remaining contact.
Frequently asked questions
How do I start Rotate Rings level 30: Diamond-shaped frame made from angled bars?
Release the small rays around the top and sides of the diamond frame. Match this branch by its position and shape before moving. If your starting arrangement differs, compare the video with your board rather than forcing the same sequence.
What is the key transition in level 30?
Work through the angled upper bars before reducing the converging lower triangle. Keep watching the contact points as the structure shrinks. The next release depends on what remains linked, so recheck the gap after a neighboring piece disappears.
What can block the finish in this layout?
A slanted bar is not an open circle; copy the matching joint movement rather than spinning around an imagined center. For the finish: Separate the last short center bars to clear the board. Move one remaining piece at a time and wait for its release before deciding whether another contact still needs attention.